Kitchen Hob Installation Auckland
Certified Gasfitters for New Builds, Renovations & Conversions
4.9 from 165 reviews
Getting a gas hob installed properly is essential for both safety and performance. Whether you’re fitting a gas cooktop into a brand new kitchen, adding gas cooking to a renovation, or converting from electric to gas, Citywide Plumbing & Pumps handles the full installation. Gas line, connection, testing, and compliance certification, all done in a single visit.
Request A Quote
Why Cook With Gas?
There’s a reason professional chefs prefer gas. For home cooks, a gas hob offers real advantages over electric and ceramic cooktops:
- Instant heat control – Gas responds immediately when you turn the dial up or down. No waiting for elements to heat up or cool down.
- Even heat distribution – The flame wraps around the base of the pan, distributing heat more evenly than a flat electric element.
- Works during power cuts – A gas hob with manual ignition will still work when the power goes out. Handy in Auckland’s storm season.
- Lower running costs – Gas is generally cheaper to run than electricity for cooking, particularly if you’re already on a gas supply for hot water.
- Compatible with all cookware – Unlike induction, gas works with any pot or pan material.
Types of Gas Hob Installation
Not every hob install is the same. Here are the most common scenarios we handle:
New Build Installation
Your builder or kitchen company has the hob ready, and we connect it to the gas supply. This is the most straightforward type of installation, as the gas line is usually already roughed in during the build. We connect, test, and certify.
Renovation Installation
Kitchen renovations often involve moving the hob to a new location or upgrading from an older cooktop. If the gas line needs to be extended or rerouted to the new position, we handle that as part of the job.
Electric to Gas Conversion
Switching from an electric cooktop to gas? We run a new gas line from your existing gas meter to the kitchen, install the hob, and certify the work. If your home doesn’t have a gas supply, we can set up an LPG bottle system externally and run the line from there.
LPG Bottle Setup
For homes not connected to town gas, we install the LPG bottle and regulator outside the property and run the gas line to your kitchen. This is a common setup for rural properties, lifestyle blocks, and homes that have disconnected from the gas network.
What's Involved in a Gas Hob Installation?
A like-for-like califont replacement is one of the most straightforward gas fitting jobs:
Site assessment
We check your existing gas supply, the hob location, and what gas line work is needed. We also check clearances and ventilation requirements.
Gas line work
If there’s no existing gas connection at the cooktop location, we run a new gas line from the meter or LPG bottles to the kitchen. In older homes, this often means running the line through the subfloor or along the exterior wall.
Hob connection
We connect the hob to the gas supply, set the correct gas pressure, and adjust the burners for your specific gas type (natural gas or LPG).
Testing
We test every burner for correct flame pattern, ignition, and gas flow. We also check for leaks across all connections.
Compliance certificate
A Gas Safety Certificate (GSC) is issued on completion. This is legally required for all gas hob installations in New Zealand and confirms the work has been tested and is safe to use.
Most hob installations where a gas line already exists can be completed in 2-3 hours. If a new gas line needs to be run, allow half a day to a full day depending on the complexity.
Gas Compliance Certificates
Under New Zealand law, all gas fitting work must be completed by a certified gasfitter and a Gas Safety Certificate must be issued on completion. This applies to every gas hob installation, whether it’s a new build, renovation, or simple swap.
The certificate confirms your installation has been tested, is safe, and meets NZ standards. Keep it with your property records, as it may be required for insurance claims or when selling your home.
Our gasfitters hold current Certifying Gas Fitter practising licences issued by the Plumbers, Gasfitters and Drainlayers Board (PGDB).
Trusted Across Auckland
Why Choose Citywide Plumbing & Pumps?
Under New Zealand law, all gas fitting work must be carried out by a licensed gasfitter and certified on completion. At Citywide Plumbing & Pumps, we issue the required gas compliance certificates with every job, no exceptions.
Certified & Licensed Gasfitters
Every job is carried out by a Certifying Gas Fitter licensed by the PGDB, and signed off with the required compliance certificates.
The Whole Job, One Team
Gas, electrical and plumbing handled in-house, from califont swaps to full gas to heat pump conversions. No juggling multiple trades.
Over 30 Years On The North Shore
Local, experienced and trusted, with over 165 five star Google reviews from Auckland homeowners and businesses.
Safe, Compliant & To Code
All work meets current NZ gas regulations, so you’re covered for records, insurance and resale.
Frequently Asked Questions
Can I install a gas hob myself?
How much does a gas hob installation cost?
Can I convert my electric cooktop to gas?
Do you supply the hob as well?
What gas type does my hob need?
Request a Free Quote
Need a gas hob installed? Call us on 09 444 6504 or fill out the form below and we’ll get back to you promptly.
